I have a 15.1-inch NEC MultiSync LCD1550X 15.0-inch (15.0" viewable image size) monitor, it has been integrated with ELO Touch equipment and assembled by Pixelink (who is a NEC partner). Does anyone have a source for 15" bezels to work with these LCD monitors? I wanted to give things a finished look as I go and build the juke case. I found someone who has something to make it a front mounting monitor, but they want $130 ($US) plus shipping for it which is kind of a lot for a piece of plastic I think.
The alternative is to use a thin piece of wood for the front of the monitor and make it look nice with a picture frame border. I kinda wanted it to look a little more professional though.
Thanks in advance,
Tom
Might want to try one of these from Happ Controls http://www.happcontrols.com/monitors/49010500.htm (http://www.happcontrols.com/monitors/49010500.htm) only around $16.00 they are 13" or 19" but you may be able to get it to work as the inside dimentions look to be close to 15". Good Luck
there are a lot of paces that will cut custom Plexiglas for really cheep. maybe you could try some thing like that.
Thanks guys. I think that I'll use a thin piece of plexiglass over wood so I can still mount the monitor securely and supply a nice finished tapered lip to the edges of the opening.
Summer is coming, and I have already done my spring garage clean up. So I am gearing up to start building the cab.
another option if your artistically inclined .. is to make your mounting frame from wood but get a piece of laminated art board from your local art supply store and a professionally printed overlay.. make your bezel cut and sandwich that between the plexi and the wood frame ..
and as a recommendation Scott at mamemarquees does awesome work he went way above n beyond duty on my last project and ordered a whole roll of special print paper on my last build on the chance it would be used again cant ask for better treatment.
Mmal