All,
Hi, I hope that you can help. I currently have a Sound Leisure Jukebox and was wondering if I could add this software as I would also like to show videos on two large screen projectors which I have in my pub in Nairobi, Kenya. Is this possible and if so how would I go about it.
Thanks so much
Rob
Hi Rob,
Yes you could convert it and use the software, however the ins and outs someone else will be able to tell you, as if it is a legitimate jukebox, then I think that you need something from the sound lesuire hard drive to power the amp and also the monitor, but you can download that software as well.
Regards
Mark
If you want to convert a sound leisure cab you need to install a new pc running windows 7 with a dual output graphics card. You will then you need to use a keyboard encoder like an iPAC (There are cheaper alternatives) so that the coins send a key press to windows. I usually open up notepad and check each coin sends the right key press.
Then you just need to make sure you have the amp hooked up to the pc, some cabs it's just a standard audio connection. Others require a different cable it depends how old it is.
Then it's just a case of setting up E-touch to auto load and using some software to tweak the windows boot up screen.
Hi All
I've posted in the other thread as well. Thanks barry for all your help but the software didn't work in the end i did find it at
http://www.datadisplay-group.com/fileadmin/treiber/Zytronic/Zytronic_Win7_Vista_XP_SP3__Driver_V4.1.10R.zip
if anyone else is having this issue with the old SL systems. This includes the older drives for the pre-100 Zytronic drivers that aren't available through their website, it's now up and running perfectly. (No additional power output required)
Regards
Slammer
Cheers for the link, shall check it out when I put back my arcade cabinet, as the drivers I had sometimes would not work.
Regards
Mark