#2018-02-04 23:18:58#,"76","Path not found","Form1","Form_Load","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"35600","Index out of bounds","Form1","Form_Load","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"35600","Index out of bounds","Form1","Form_Load","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:46:44#,"481","Invalid picture","Module1","filter_load","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
Hope to hear from someone, Joop
Error codes are pretty standard for this program. It looks as if you are using the beta, a problem in that beta was found a few days ago in relation to something where my mind has gone blank.
Ignore the error codes unless you are having a problem with the software.
Regards
Mark
Hello Mark, thanks for answers, you are right its the last beta.
Sure there are problems with this software, but not related to this error log i think.
This get back every time i use the juke, there is " Path not found "and "Invalid picture " in it, so i thought try to find whats happening there.
Regards, Joop
Being honest, is the jukebox working 100%? If it is do not worry about the error log, that always throws up an error at some point. I could sit here all day and keep deleting the error log and even on a fresh install with 10 albums, I bet I can throw up an error code.
Do not obsess with the error codes unless you have an actual problem.
Regards
Mark
Those are odd errors form the start up sequence that do not present themselves on my dev machine so I have been unable to pin them down. I wish i could because they are annoying me.