Well its been a very long time between builds and want to build one for my dad who is not well and can not use a touch screen so how do i wire in buttons to make it simple please.
Thanks in advance.
Ok I am giving my take on this, you might need an ipac board https://www.arcadeworlduk.com/categories/Arcade-Parts/Printed-Circuit-Boards/Interface-Boards/
You can then buy buttons and cables and then run it as you would a keyboard.
This is a UK shop, but depending upon which Country you are in, you will find shops like this in your local Country.
The other cheaper option is using a keyboard but that would not look the same.
Regards
Mark
Hi yes thats the information i was looking for is that the only way to operate with simple buttons
Here is a video for doing something simpler
https://www.youtube.com/watch?v=0XlY4-y5zBo
This is just a hack and probably not for the faint hearted.
A keyboard encoder is still cheap enough rather than say an ipac board.
Regards
Mark
Mark has it spot on and here is a good source for the hardware.
https://www.arcadeworlduk.com/
I had already posted a link to their website, see above ;)
I said this was a UK shop, but would have such shops in different Countries ;)
Doh :chad