does etouch run ok on a network setup
i know there as been some talk in the past about it but at the time it wasnt in my intrests
which would be better one of those network caddy or a server pc
Over a wired network i have never had any issues. I assume you are looking at putting you media on a different machine and accessing it over a network connection. I have seen speed issues with wireless but wired has been fine. I used 100mb connection i cannot vouch for 10mb.
would prefure a wireless network but wired is not impossible just alot more work involved
do you know what these usb to lan converters are like
I have never used them, I just go with lan cards. For drives i would just get a NAS which will have an ethernet socket on it. Why did you want to do this rather than use a USB drive, just curious.
toying with the idea of doing another wall unit in my front room so which ever
jukebox i use the album collection is the same
also i dont seem to keep my jukeboxes when somebody shows me cash i let
them go and after rebuild the collection again so if ive got it stored in my
network its alot better for me when i do another project
Quote from: jukejohn on April 07, 2010, 01:39:51 PM
toying with the idea of doing another wall unit in my front room so which ever
jukebox i use the album collection is the same
also i dont seem to keep my jukeboxes when somebody shows me cash i let
them go and after rebuild the collection again so if ive got it stored in my
network its alot better for me when i do another project
Fair enough i see what you are saying.
Might want to try Wireless N, as I am streaming video to my Media PC and it seems to work very well.
I never seem to have any luck with N, i have a netgear usb N wireless card and my internet wasn't even usable to the point i had to go with a cable. It's probably me, i think there is a lot of interference.
might be worth a try
its all going to be trial and plenty of error
might be worth trying it on my laptop and see what etouch
is happy with if it ends up cabled so be it
just checked my wireless router and its a n so ive
just orderd a nas caddy
i havent built my second juke so my laptop will have
to play that part
hope to give you a update over the weekend :beer
When I ran G and N there was a bit of a lag between loading of screens and songs.
If Freebox had a method of Caching the album images or something it would probably run a bit better on a wireless network, but I honestly noticed a lag. That's why I'm still loading my tunes on the local hard drive or over a wired network.
Quote from: kizer on April 09, 2010, 07:04:01 PM
When I ran G and N there was a bit of a lag between loading of screens and songs.
If Freebox had a method of Caching the album images or something it would probably run a bit better on a wireless network, but I honestly noticed a lag. That's why I'm still loading my tunes on the local hard drive or over a wired network.
Yeah i agree
Ive read that if you are using a N wireless router, and have one of those 2.4 Ghz cordless phones in the house, the phone will interfere with the routers signal. Usually the router is using channel 11 out of the box - if you change it to 1, the problem disappears. (Ive had to do this myself last month when i bought my new router)
well ive got everthing
wirless n router/n wirless dongle/network caddy
ive set up my pcs and jukebox to see each other
only problem is non of them see the caddy in the
network i thought this would be a generic thing
looked in my wireless router settings and still no
joy
HELP HELP HELP
It should have a default IP address, put that in your browser and it might bring up a config page where you can set it to DHCP so it will get the IP from your router. You can also set the network name.
been there before but will try again
i have connected it to one of the ports on the wireless router
that is correct before i go any further isnt it
Yes that is correct. Can you ping it's IP address from the command prompt?
ok got my network set up but unable to play no track or cover infoe
its like there untagged it does name each album
i can play a track with media player and i tried it with another
jukebox software i use and that sees covers and tag infoe but
errors when a track is selected
HELP :downer
Sounds like a permissions thing, what permissions do you have set? As it's your own network you should just set it to full cotnrol.
does that count for xp
i can get it to play randam play but thats it
i have also maped it as a drive z because etouch doesnt seem to give
network as a option well not v6 beta gonna try now with v5 release
You do have to map it as a drive.
in v6 it will see the albums but the other versions cant cope.v6 doesnt have any
problems playing randam tracks but you just cant see any listings to select a track
all other juke software does work but im a etouch adict
any members out there using a wireless storage that could help not sure if
its me or etouch
So you have the drive mapped, can you browse the drive fine in windows? When you build the library are you building agains the drive you have mapped Z:\ and is this drive still mapped when you launch E-Touch?
going to start all over again just got a network adapter today
which convert a standard usb to network so using a 2.5 320gb
drive and get back to you soon as this is the way i wanted
to do it in the first place
cheers barry