coin mech

[leeclark2612]

im gonna use a excel board
heres a couple of ebay[uk] links that might be of intrest

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380258975400&ssPageName=STRK:MESINDXX:IT

http://cgi.ebay.co.uk/1-MECHANICAL-COIN-MECH-S1-FROUNT-PLATE-/230596726390?pt=UK_Video_Games_Coin_Operated_MJ&hash=item35b0a2ce76

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380265396332&ssPageName=STRK:MESINDXX:IT

The last link you posted is actually a cheaper copy of the excel board, doesnt work so well...

[jukejohn]

no what i mean is ive got a couple of excel boards to use
i just put the links up if anybody was intrested

[jukejohn]

im trying to get a cashflow 330 mech to run via a excel board
but tried various methods but no go ive got 2 of these and same
result no pulse is picked these are comonly used in nsm cabs

i set it up first on a c120 mech everything works fine but
no go with the 330 

[Barcrest]

C120 sends a low pulse, they are easy to hook up with an ipac because of this. The C330 I am not sure how it sends it pulse. Does it not do CCTalk?

[jukejohn]

no tried that i would use the 120 but the reject port is opisite to the 330
if you get what i mean besides that the juke ive got on ebay belongs to that cab

there must be a mech that fits this cab as there are various nsm conversions out there

[Barcrest]

You do know there are different C120's the accept coins and reject coins from the top, bottom and front?

[jukejohn]

no i wasnt aware of that i think ill sit on it for a while and keep a eye on ebay

buggerd up my fun though

[Barcrest]

Just got back from the footie, expected more response to beta 10... Never mind, back out to Karaoke now so I will check later. The only reason I know about the C120's is i wanted a front load and front reject and brought some and they were top load front reject. I was able to take a hacksaw to them to make them work, not ideal but they did work in the end. You can get the different bezels for the different types.

Mine has a C220B in it, I have yet to attempt to hook that up. It should be interesting LOL. to be honest I might not bother and just sell the thing as it's pretty much gathering dust. Might get more use out of it if i had the wall mounting bracket so I could get it up off the floor.

[jukejohn]

just won a ms111 on ebay see what i can do with that when it comes

[jukejohn]

using a c120r coin mech everythings ok but 50p gives the
same value as 10p is this because the coin mech is not
set up for this value  pound coins ok

[Barcrest]

using a c120r coin mech everythings ok but 50p gives the
same value as 10p is this because the coin mech is not
set up for this value  pound coins ok

You can get them re-programmed, i did for £2 when i needed that.