Author Topic: Rowe CD-100 restoring  (Read 76 times)

Offline Rowejukebox

  • Newbie
  • *
  • Posts: 4
  • Fu: +0/-0
Rowe CD-100 restoring
« on: November 23, 2018, 04:00:30 PM »
Where I'm  from, jukeboxes are scarce. I found this in a barn not in the best condition to say the least. The jukebox door was open, so the inside was just as bad as the outside when it comes to dirt and rust. Everything had to be disassembled, cleaned, reassembled. It was a mess having to clean nooks and crannies with brushes, q tips, it got quite involved. Once everything was removed from the cabinet the cabinet was cleaned inside and outside. This is a lot of work, but with patients it can be done.





Offline Rowejukebox

  • Newbie
  • *
  • Posts: 4
  • Fu: +0/-0
Re: Rowe CD-100 restoring
« Reply #1 on: November 23, 2018, 04:10:27 PM »
Having a lot of issues, the Rowe CD-100 was rebuilt from the ground up. Nothing was left out, everything was serviced or upgraded. Everything was replaced with Rowe jukebox parts. The "CCC" computer, "power" computer, "mech" computer, CD-PRO computer was rebuilt. The locks were buggered up and I found original Rowe locks.
« Last Edit: November 23, 2018, 04:20:03 PM by Rowejukebox »

Offline Rowejukebox

  • Newbie
  • *
  • Posts: 4
  • Fu: +0/-0
Re: Rowe CD-100 restoring
« Reply #2 on: November 23, 2018, 04:26:45 PM »
The jukebox is set up to use quarters, I programmed the computer.

Offline Rowejukebox

  • Newbie
  • *
  • Posts: 4
  • Fu: +0/-0
Re: Rowe CD-100 restoring
« Reply #3 on: November 23, 2018, 11:50:34 PM »
https://sites.google.com/site/myrowecd100restoration/

Link to the restoration of the CD-100 jukebox