Swipe Action

[Gaucho]

I have tried adjusting the swipe value under animation to no avail.

Each swipe seems to zoom through about 13 pages regardless of weather I have it set to 5 or 50. Am I missing a setting elsewhere?

[Barcrest]

I have tried adjusting the swipe value under animation to no avail.

Each swipe seems to zoom through about 13 pages regardless of weather I have it set to 5 or 50. Am I missing a setting elsewhere?

Is this on the fake cover flow or on a normal album page?

[Gaucho]

Normal album mate.

[Barcrest]

Normal album mate.

Hmmm must think that it's in coverflow mode for some reason, retro fitting that didn't work too well. The only 100% way would be to alter the file structure making older COV Files incompatible.. I'll take a look for the next beta.

[Gaucho]

Sorry forget that, it's just moving 4 pages at a time.

Missed that somehow.

[bzpilot]

I am experiencing the same multipage (normally 3 or 4 pages at a time for me) when using the standard covers (non coverflow) also.

I also noticed the latest versions of E-Touch (at least the most recent version 8 betas) have a Swipe Value of "2" set as the default upon install. I know for me anything less than about 5-10 (depending on how fat the fingers are of the person touching the juke) will more often than not cause the swipe to activate even if just tapping the screen. I see this being an issue especially on the album view. I'm not positive what the value actually references directly but it appears to possibly be associated with number of pixels required to activate a swipe. I know a value of "75" appears to require a minimum swipe of at least halfway across an 150px wide album cover in order to activate the swipe, anything less and it selects the album. A value of "200" requires a swipe a little over a 150px wide album cover to activate swipe, again anything less and it will select that album. You might want to set a higher default value especially because most will be unfamiliar with the setting and what it does. I know it took me awhile myself to figure out the setting way back when the swiping was first integrated.

[Barcrest]

Fixed it now for the next beta for those of you that use it. The default is set to 10 do you think it needs to be higher?

[bzpilot]

I think "10" should be fine. It is what I currently use and I haven't had any issues recently with swipe activating when it wasn't intended.