Know someone here what these error log rules mean

[Jukeman1946]

#2018-02-04 23:18:58#,"76","Path not found","Form1","Form_Load","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:37:02#,"35600","Index out of bounds","Form1","Form_Load","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"13","Type mismatch","Module1","open_ini3","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:45:21#,"35600","Index out of bounds","Form1","Form_Load","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"
#2018-02-04 23:46:44#,"481","Invalid picture","Module1","filter_load","E-Touch v10.1.7","jpvbe","DESKTOP-ORTT1TC"

Hope to hear from someone, Joop

[Mark Norville]

Error codes are pretty standard for this program. It looks as if you are using the beta, a problem in that beta was found a few days ago in relation to something where my mind has gone blank.

Ignore the error codes unless you are having a problem with the software.

Regards

Mark

[Jukeman1946]

Hello Mark, thanks for answers, you are right its the last beta.
Sure there are problems with this software, but not related to this error log i think.
This get back every time i use the juke, there is " Path not found "and "Invalid picture " in it, so i thought try to find whats happening there.

Regards, Joop

[Mark Norville]

Being honest, is the jukebox working 100%? If it is do not worry about the error log, that always throws up an error at some point. I could sit here all day and keep deleting the error log and even on a fresh install with 10 albums, I bet I can throw up an error code.

Do not obsess with the error codes unless you have an actual problem.

Regards

Mark

[Barcrest]

Those are odd errors form the start up sequence that do not present themselves on my dev machine so I have been unable to pin them down. I wish i could because they are annoying me.